Canon PowerShot SD100 User Manual page 31

• Please note that the date and time settings may reset to the default
settings if the camera battery has been removed for more than three
weeks. Reset them when this occurs.
• Setting the date and time settings does not cause the date/time
stamp to appear on images.
• Charging the Date/Time Battery
- The camera has a built-in rechargeable lithium battery for saving
settings such as the date and time. This battery is recharged by
the battery pack while it is in the camera. Right after purchasing
the camera, leave a charged battery pack in the camera, or plug
in AC Adapter Kit ACK900 (sold separately), for about 4 hours to
charge the date/time battery. It will charge even when the camera
power is turned off.
- If the Date/Time menu appears when the camera power is turned
on, the date/time battery charge is low. Use the above method to
recharge it.
• You can print the date on images (p. 126).
Set the date and time.
5
• Use the
(year, month, day, hour, minute and date
format).
• Use the
Press the SET button.
6
The setting is complete.
Press the MENU button.
7
The display will return to the Rec. or Play
screen.
button to select a field
button to change its value.
29