Canon PowerShot SD100 User Manual page 125

Power Lamp
This shows when a BJ
printer is connected.
• On Bubble Jet printers with operation panels, images cannot be
printed through the operation panel while the camera is connected.
• The following cannot be conducted while the printer is connected.
- Playing movies
- Setting the language with the SET and the MENU button
combination.
• When the printer is disconnected, the
disappear from the LCD monitor and the camera will revert to the
standard replay mode.
• Use the following procedures to detach the cable from the camera
and printer.
1. Detach the cable from the printer.
2. Shut off the camera's power.
3. Detach the cable from the camera.
Ensure that you grip the connector's sides when you detach the
cable from the camera's DIGITAL terminal.
Turn the mode switch to
4
(Replay).
Press the ON/OFF button until the
5
power lamp lights green.
will display when the printer is correctly
connected.
or symbol will
123