Canon PowerShot SD100 User Manual page 124

This shows when a direct print
compatible printer (CP series) is
connected.
Connecting to a Bubble Jet Printer
Please read the Quick Start Guide supplied with your Bubble Jet
printer to see if it is compatible with the camera's direct print function,
and for instructions regarding the connection cables and the printer's
general operation.
DIGITAL Terminal
To the BJ Printer
122
5
6
Power Lamp
1
2
3
Connection Cable
Turn the mode switch to
(Replay).
Press the ON/OFF button until the
power lamp lights green.
will display when the printer is correctly
connected.
Press the ON/OFF button to turn the
camera off.
Turn the Bubble Jet printer's power on
after you have connected the power
cord to the Bubble Jet printer and
inserted the other end in a power outlet.
Connect the camera and printer
using the connection cable.
To connect to the DIGITAL terminal of the
camera, slip your fingernail under the edge of
the terminal cover to open it, then insert the
connector until you hear it click into place.
Orient the cable so that the word Canon on the
connector faces the camera's front panel.