Download Print this page
HMDX Hangtime User Manual

HMDX Hangtime User Manual

Advertisement

Quick Links

HEY THERE!
WE'RE HERE TO HELP. CONTACT US!
You've got questions? We've got answers.
Contact a Consumer Relations representative by phone or email to help answer any questions.
Please be sure to have the model number of your product available. (Hint: It's HX-P140)
Register your speaker! Information about where you bought it and how you're using it is like
gold for the people who make these speakers.
USA:
www.hmdxaudio.com/customer-support/product-registration
CAN:
www.hmdxaudio.ca/product-registration
JUST CHARGE IT
Charging the speaker is so easy you've probably figured it out by
now, but just in case, you've got two options: you can charge it
using your computer or a wall outlet. The Hangtime needs about
3 hours for up to 4 hours of party time.
1. The cord that came with the speaker — the one with the USB
on one end and the micro USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you'll need to pick up a power
cord with a micro USB the next time you're at the store, or use any
USB AC adapter, including the one for your cell phone.
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. This is the power button.
2. Turn the music up.
3. Push it to play, push it again to pause.
4. Turn the music down.
5. Check out how much juice is in the battery.
6. Lets you know when Bluetooth is connected.
7. Here's where you hook it up old-school.
8. The power cord goes here.
BLUETOOTH
CONNECTION — IT'S A SETUP
®
Like any amazing couple, this one starts with a connection — one between your
device and the speaker's Bluetooth. Here's how it works:
1. Make sure the smartphone, tablet, or computer you're using with the speaker
has Bluetooth.
2. Turn on the speaker and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for HMDX Hangtime in your device's Bluetooth list or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you're lame.
Continued on page 2.
H A N G T I M E
USER GUIDE
AND WARRANTY INFORMATION
Thank you for purchasing the HMDX Hangtime. Check out the sections
below for all the important information about your new speaker.
5
6
4
Bottom:
3
2
1
CANADA
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CHARGE
SHED SOME LIGHT
Bluetooth Light
Pairing Mode
Connected
7
8
Aux-In Mode
HX-P140
USA
cservice@hmdxaudio.com
1.800.753.3000
8:30am–7:00pm EST M–F
3h
AC adaptor not included.
Battery Light
Charging
Ready to Party
Bluetooth
®
on
3s
Devices
>
HMDX Hangtime

Advertisement

loading
Need help?

Need help?

Do you have a question about the Hangtime and is the answer not in the manual?

Questions and answers

Summary of Contents for HMDX Hangtime

  • Page 1 3. Do whatever your device needs you to do on its end. 4. Look for HMDX Hangtime in your device’s Bluetooth list or click YES. 5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
  • Page 2 To disable pairing of an existing device and pair a new device, press and hold the PLAY/PAUSE button for 5 seconds to activate pairing mode. Note: If you turn on your Hangtime but haven’t started the party yet, it will automatically power off after 2 minutes of unpaired inactivity.
  • Page 3 Do not use attachments not recommended by HMDX. harmful interference in a residential installation. • HMDX is not liable for any damage caused to smartphones, iPod/MP3 players, or any other device. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may •...