Table of Contents
Advertisement
Programming
You can use the programmable func-
tions to alter the dryer's electronics to
suit your requirements.
Programming is carried out by following
these steps (, , ... ) using the
sensor controls.
Accessing the programming level
Before starting
- Make sure that the programme se-
lector is turned to any of the pro-
gramme settings.
- Make sure that the door of the
tumble dryer is open.
Touch the Start/Add laundry sensor
control and hold it down whilst carry-
ing out steps –.
Close the tumble dryer door.
Wait until the Start/Add laun-
dry sensor control, which will now be
flashing quickly, lights up con-
stantly ...
... and then release the Start/Add
laundry sensor control.
will light up in the time display.
Programmable functions
Choosing and selecting a program-
mable function
The number of the programmable
function will appear in the time display
as and a number:
e.g. .
Touch the or sensor control to
scroll to the next or previous pro-
grammable function:
Programmable function
Cottons drying levels
Minimum iron drying levels
Cooling down temperature
Buzzer volume
Keypad tone
PIN code
Conductivity
Control field switch-off beha-
viour
Memory
Anti-crease
Buzzer active
Airways indicator
Display brightness dimmed
* RemoteUpdate
* Remote control
* SmartGrid
* only visible after networking
Confirm the selected programmable
function by touching the Start/Add
laundry sensor control.
77
Advertisement
Table of Contents
