Miele TEF 765 WP Operating Instructions Manual page 20

Operating the tumble dryer
f Time display
After the programme has started, the
programme running time will appear
on the display in hours and minutes.
– When Delay start is being used,
the programme running time will
appear after the Delay start period
has elapsed.
– With most programmes, the run-
ning time displayed may vary or
"jump". The following factors,
among others, affect the pro-
gramme running time displayed:
the quantity of laundry, the type of
fabric and the residual moisture in
the laundry. The electronic module
adapts to these factors with in-
creasing accuracy.
g Start/Add laundry sensor control
Touching the Start/Add laun-
dry sensor control starts a pro-
gramme. The current programme
can be interrupted to add laundry.
The programme can be started when
the sensor control is flashing on and
off. The sensor control lights up con-
stantly once the programme has
started.
20
h Sensor controls
for the Delay start function or the
Time Dry/DryFresh programme run-
ning time

After touching the
 sensor control, a later
start time for the pro-
gramme (Delay start) can
be selected. Once selec-
ted,  lights up brightly.
  The  or  sensor con-
trols are used for select-
ing the duration of the
Delay start period or the
duration of the Warm air/
DryFresh programme.
i Optical interface
This is used by the Customer Ser-
vice Department as a transmission
point.
j Programme selector
for selecting programmes and for
switching off the appliance. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to the  position.
If the tumble dryer is connected to
the WiFi network, you will have ac-
cess to the following alternative op-
tions for selecting programmes.
 MobileStart
You can operate your tumble
dryer remotely with the Miele
app.
 Wash2Dry
A drying programme tailored to
the laundry is set in conjunc-
tion with the connected wash-
ing machine.