Miele TEF 765 WP Operating Instructions Manual page 24

Heat pump dryer
Table of Contents

Advertisement

Before using for the first time
Setting up Miele@home
There are 2 ways of connecting:
1. Via the Miele app (default)
2. Via WPS
To do so, you will need a WPS-com-
patible router.
Logging in via the Miele app
The Miele app can be used to connect
to your network.
 Turn the programme selector to Mo-
bileStart .
 appears on the time display and
the timeout starts to count down from
10 minutes. The Miele app will guide
you through the remaining steps.
When you have successfully connected,
 will appear on the time display.
Logging in via WPS
 Turn the programme selector to Mo-
bileStart .
 Touch the   sensor control until
 appears on the time display and
a short keypad tone sounds.
The timeout then starts to count down
from 2 minutes on the time display.
24
 Activate the WPS function on your
router within 2 minutes.
When you have successfully connected,
 will appear on the time display.
Tip: If the connection has not been set
up when the timeout has finished
counting down, repeat the process.
Follow the procedure for using
for the first time outlined in
these instructions
 Read "1. Notes on correct laundry
care" and "2. Load the tumble dryer".
 You can then load the dryer and se-
lect a programme as described in "3.
Select a programme and start it".

Advertisement

Table of Contents
loading

Table of Contents