Turning On Upnp In Windows 10 Example - ZyXEL Communications NBG7815 User Manual

Use this screen to enable UPnP on your NBG7815. Click Settings > Internet > UPnP to display the following
screen.
Figure 54 Settings > Internet > UPnP
The following table describes the labels in this screen.
Table 35 Settings > Internet > UPnP
LABEL
UPnP Setup
Enable UPnP
UPnP Setup Rule
No.
Protocol
InPort
OutPort
IP Address
APPLY
CANCEL

9.9.1 Turning on UPnP in Windows 10 Example

This section shows you how to use the UPnP feature in Windows 10. UPnP server is installed in Windows 10.
Activate UPnP on the NBG7815 in Settings > Internet > UPnP.
Make sure the computer is connected to the LAN port of the NBG7815. Turn on your computer and the
NBG7815.
Click the start icon, Settings and then Network & Internet.
1
Chapter 9 WAN
DESCRIPTION
Select Enable to activate UPnP.
Be aware that anyone could use a UPnP application to open the Web
Configurator's login screen without entering the NBG7815's IP address (although you
must still enter the password to access the Web Configurator).
This is the number of an individual UPnP entry.
This is the transport layer protocol used for the service.
InPort is a port that a LAN computer uses when it requests a particular service. This
port is only applicable to the local network.
This field displays the port number of the UPnP entry.
OutPort is the well-known port that the WAN server uses to reply to the LAN computer
that made the request using InPort.
This field displays the port number of the UPnP entry.
This field displays the IP address of this UPnP entry.
Click APPLY to save your settings.
Click CANCEL to return to the previously saved settings.
NBG7815 User's Guide
103