Table of Contents
Advertisement
Recessed Channel Installation Guide
End Caps
Node Recessed Channel can be provided with or without end caps. End caps are factory installed as required.
END CAP
END CAP HARDWARE
Figure 10
Cutting Node Recessed Channels to Length
Where possible the channel should be ordered to length based upon contractor site measurements.
If the channel must be cut to length, the end cap should be removed, the length shall be cut and the end cap shall be
re-attached. The maximum length that can be trimmed is defined by the position of the bridge bracket.
7
v001 | Recessed Channel Installation Guide
Advertisement
Table of Contents
