Table of Contents
Advertisement
Recessed Channel Installation Guide
Node Recessed Channel Installation Sequence
The Node Recessed Channel ships fully assembled (skirts, mounting bracket, bridge plates and Node face plate).
Note:
All mounting hardware and sub structure is to be supplied and installed alongside the Node Recessed Channel.
Lighting and other services must be installed by qualified personnel.
It is recommended that the Node Recessed Channel is supported no more than 150mm from an end or 150mm from
any joint.
5.91
150
9.81
249
MOUNTING WIDTH
Recessed Channel to Ceiling Panels
Before installing the Node Recessed Channel, ensure whenever possible, there is access to both sides. Support the Node
Recessed Channel mounting angles from the soffit at the required height for finished ceiling.
Recessed Channel to Weave Panel
v001 | Recessed Channel Installation Guide
118.11
3000
MAX LENGTH
PLENUM CAN BE MOVED
ALONG THE LENGTH
OF THE CHANNEL
Figure 2
Recessed Channel to Soft Cell Panel
Figure 3
23.62
600
MAX RECOMMENDED
SUPPORT SPACING
SLOT DIMENSIONS
0.39" X 0.98" [10MM X 25MM]
4
Advertisement
Table of Contents
