Recessed Channel Installation Guide
Connecting Node Channels
Roll pins are supplied which must first be knocked into place, then pressing together two sections of channel.
Node Recessed Channels can be connected together by way of key stock splicing the connection joint and fastening
into place.
Connect all required sections ensuring no visible gap between both sections.
v001 | Recessed Channel Installation Guide
Figure 4
LOOSEN SCREWS TO SLIDE THE ALIGNMENT BAR BY 1"
& TIGHTEN THE SCREWS ONCE THE BAR IS IN PLACE
DRIVE STYLE : HEX
DRIVE SIZE : 5/32"
(INSTALLATION BY OTHERS)
CHANNEL SEAM - NO GAP
Figure 5
5