Polaris RANGER SP 570 Owner's Manual page 61

COMPONENT
EPS SEPIC Voltage
Error
UNIT SELECTION DISTANCE
1. Press and hold the MODE button to enter the Options Menu.
"OPTIONS" will display on the screen for 3 seconds before showing first menu
2. Select "Units-Distance" from the Options Menu by pressing the MODE
button.
Reference the image shown above:
q
Press the MODE button.
w
Toggle the Up/Down Buttons to change the units (MPH or KPH)
e
With the correct unit displayed, Press the mode button which will set
the unit and return to the Options Menu.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
DIAGNOSTIC CODES
CONDITION
EPS MODELS ONLY
Voltage Above
Normal, Or Shorted To
High Source
Voltage Below
Normal, Or Shorted To
Low Source
NOTICE
FEATURES AND CONTROLS
SPN
524086
524086
item.
FMI
3
4
59