Polaris RANGER SP 570 Owner's Manual page 110

MAINTENANCE
8. Using a cap-style oil filter wrench or equivalent, turn the filter
clockwise to remove it.
9. Using a clean dry cloth, clean the filter sealing surface on the crankcase.
Make sure the old filter o-ring is completely removed.
10. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to
make sure the o- ring is in good condition.
11. Install the new filter and turn by hand until the filter gasket contacts the
sealing surface, then turn an additional 3/4 turn.
12. Always clean away all dirt and debris from the dipstick area before removing
the dipstick. Remove the oil cap
1.9 liters (2 qts.) of recommended oil.
13. Reinstall and tighten the dipstick.
108
r
or the dipstick
e
counter-
t
and fill the sump with