Table of Contents
Advertisement
3. Close the oven door halfway to the first
opening position. Then pull forward and remove
the door from its seat.
4. Put the door on a soft cloth on a stable surface.
5. Release the locking system to remove the
internal glass panel.
22
6. Turn the two fasteners by 90° and remove them
from their seats.
7. First lift carefully and then remove the glass
panel.
8. Clean the glass panel with water and soap. Dry
the glass panel carefully.
When the cleaning is completed, install the glass
panel and the oven door. Do the above steps in the
opposite sequence.
The screen-printing zone must face the inner side
of the door. Make sure that after the installation the
surface of the glass panel frame on the screen-
printing zones is not rough when you touch it.
Make sure that you install the internal glass panel in
the seats correctly.
90°
2
1
Advertisement
Table of Contents
