RetroSound New York Quick Start Manual

What's in the Box
New York Face
Shafts
A
Hardware
D E F
x(2) x(2)
x(4) x(4)
Knobs
B
x(2)
C
Refer to Kit Installation
Instructions for use.
G H
x(4)
x(4)
Refer to the user manual included in your motor box or on our website for more comprehensive instructions.
tech@retromanufacturing.com | help.retromanufacturing.com
Radio Face Quick Start Guide
Installation
Place a metal spacer
on each shaft. Slide the
shafts into the Radio
Face.
F
(2)
x
(2)
x
Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the Radio Face to the Radio
Motor with the four small screws. With the Radio facing towards you, plug the top Control Shaft into
x(4)
the left side of the Radio Motor. Plug the bottom Control Shaft into the right side of the Radio Motor.
Modern Sound For Your Classic
Place the white plastic
spacer and thin metal
A
washer onto the shaft, then
secure with the shaft nut.
DO NOT OVERTIGHTEN.
E
G
H
Install the
rear knob
first, then the
B
C
front knob.
Backstrap must be
Top Control Shaft
mounted securely
D
D
Bottom
Control Shaft