Possible Malfunctions - Bartscher MX 235 Manual

Storage
o If the device is not used for any lengthy period, clean it according to the
aforementioned description and store it in dry, clean place protected against
cold, sun and children. Do not place any have objects on the device.

7. Possible Malfunctions

In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem
The device does
not work: knife
does not rotate or
cuts incorrectly
Interruption
during work
If you cannot remove the malfunctions:
do not open the body,
-
notify the customer service point or contact the sales agent,
-
while providing the following information:

type of malfunction;

article and serial number (rating plate of the device).
Cause
 No power.
 The device is not
connected to the power
supply.

The ON/OFF switch is
damaged.
 Thermal switch tripped due
to too long operation /
overload.

It is not possible to identify
the cause.
Solution
 Check and restore the
power supply.
 Connect the plug to the
electric socket.

Contact the service
company.
 Wait for the device to cool
and restart work.

Contact the service
company.
- 35 -