Sony Cyber-shot DSC-FX77 Operating Instructions Manual page 76

c Make sure the USB ON/OFF
switch is set to "ON" and
connect the supplied USB
cable to the (USB) jack of
the USB cradle.
USB ON/OFF switch
USB cable
d Connect the USB cable to your
computer.
• When using a desktop computer, connect the
USB cable to the USB connector on the rear
panel.
76
e Install the camera to the USB
cradle and turn on the camera.
• Make sure the camera is securely installed
to the USB cradle.
• When using Windows XP, the AutoPlay
wizard automatically appears on the
desktop. Proceed to page 79.
USB MODE
NORMAL
"USB MODE NORMAL" appears on
the LCD screen of the camera. When a
USB connection is established for the
first time, your computer automatically
runs the used program to recognize the
camera. Wait for a while.
• If "USB MODE NORMAL" does not appear,
confirm that [USB CONNECT] is set to
[NORMAL] in the SET UP settings (page 102).
• During the USB connection, do not
switch the USB ON/OFF switch or not
remove the camera from the USB
cradle. The data may be corrupted.
When you cancel the USB connection,
see "P To cancel the USB connection"
(page 77).
* During communication, the access indicators
turn red.
Access
indicators*