On The Index (Triple-Image) Screen - Sony Cyber-shot DSC-FX77 Operating Instructions Manual

f To protect other images,
repeat Step 5.
g Press MENU.
h Select [OK] with B, then press
z.
The - mark turns white and the
selected image is protected.
To cancel the protection
Select [CANCEL] in Step 4 or select
[EXIT] in Step 8, then press z.
To release protection
In Step 5, with v/V/b/B, select an image
for which you want to release protection,
and press z. The - mark turns gray and
repeat this operation for all the images for
which you want to release protection. Then,
press MENU, select [OK], and press z.
To protect all the images in
folder
In Step 4, select [ALL IN FOLDER], then
press z. Next, select [ON], then press z.
To release protection of all the
images in the folder
In Step 4, select [ALL IN FOLDER], and
press z. Then select [OFF], and press z.
62
On the Index (triple-image)
screen
a Set the MODE dial to
the SMART ZOOM W button
twice to switch to the Index
(triple-image) screen.
b Move the image you want to
protect to the center with b/B.
c Press MENU.
The menu appears
d Select [PROTECT] with v/V,
then press z.
The center image is protected, and the
- (Protect) mark is indicated on that
image.
DPOF
PROTECT
DELETE
FOLDER
101-0002 2003 7 4 10:30
PM
OK BACK/NEXT
e To protect other images, move
the image you want to protect
to the center with b/B, and
repeat Step 4.
To release protection
In Step 4, select the image from which
you want to release protection, and press z.
, press
To release protection from all of your
images, repeat this process for each of them.