Sony Cyber-shot DSC-FX77 Operating Instructions Manual page 102

(SETUP 1)
Item
LCD
BRIGHTNESS
LCD BACKLIGHT
BEEP
POWER SAVE
(SETUP 2)
Item
FILE NUMBER
USB CONNECT
VIDEO OUT
LANGUAGE
CLOCK SET
102
Setting Description
BRIGHT/ Selects the LCD brightness. This has no effect on the recorded images.
xNORMAL/ DARK
BRIGHT/ Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and easy to
x NORMAL see when using the camera outdoors or in other bright locations, but also uses up the battery charge
faster. Displayed only when you are using the camera with the battery pack. When [POWER SAVE] is
set to [ON], this item cannot be shown.
SHUTTER – Turns on the shutter sound when you press the shutter button.
x ON – Turns on the beep/shutter sound when you press the control button/ press the shutter button.
OFF – Turns off the beep/shutter sound.
x ON / OFF
Selects whether to use the POWER SAVE mode (page 14). Displayed only when you are using the
camera with the battery pack.
Setting Description
x SERIES – Assigns numbers to files in sequence even if the "Memory Stick" is changed or the recording folder
is changed.
RESET – Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording
folder contains a file, a number one higher than the largest number is assigned.)
PTP/xNORMAL Switches the USB mode (page 72).
NTSC – Sets the video output signal to NTSC mode (e.g., Japan, USA).
PAL – Sets the video output signal to PAL mode (e.g., Europe).
— Displays the menu items, warnings and messages in selected language.
OK / CANCEL Sets the date and time (page 18).