Others; Troubleshooting - Sony DSC-F1 Operating Instructions Manual

Others

Troubleshooting

Note
The SERIAL menu
defines the serial speed
via the connecting cable.
After trying the following remedies, if the problem
persists, please consult "Sony Customer Technical
Support." Also refer to the operating instructions of
the Digital Still Camera DSC-F1.
An error message appears or an error occurs.
• The connecting cable between your Macintosh and
the Digital Still Camera is not fitted properly.
m Connect the cable properly. (page 84)
• The power of the Digital Still Camera is not turned
on.
m Set the POWER/Function dial of the Digital Still
Camera to "PLAY." (page 85)
• The WIRELESS and SERIAL menu settings of the
Digital Still Camera is not proper.
m Select "OFF" in the WIRELESS menu and "38400"
in the SERIAL menu of the Digital Still Camera.
(page 85)
• The same modem or printer port may be used by
another communication software.
m Check which port the communication software
uses and assign another port for either the "Sony
Digital Still Camera Album Utility" or the
communication software.
• The Apple Talk is set to ON.
m Turn off the Apple Talk to use the printer port.
• Another communication software quits without
releasing the model or printer port and the port
becomes disabled.
m Restart the Macintosh.
• There may be some problem with the application,
Macintosh or Digital Still Camera.
m Quit the application and turn off your Macintosh
and the Digital Still Camera. And turn on the
Macintosh and the Camera. Then start the
application to see if the application works
properly.
• The memory space allocated to the "Sony Digital
Still Camera Album Utility" is too small.
m Allocate a larger memory space to the "Sony
Digital Still Camera Album Utility."
continued
125
Others