Table of Contents
Advertisement
Changing Channels
1. Using Channel Buttons
Press ▼ CH ▲ button to change channels, and the TV
changes channels in sequence. You will see all channels
that have been memorized. Channels erased or not
memorized will not be shown.
2. Using Number Buttons
(1) ATV
The "-" button has no function in ATV mode. Directly
press the number buttons to select channels.
(2) DTV
Use "-" button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press "-" → press 3.
＊Return to the previous channel, press RETURN
button.
Adjusting the Volume
Press - VOL + to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press MUTE again, or press - VOL +
directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on
the screen. (It shows all or some of the information about
Input, Channel, Resolution, Audio Type, etc., depending
on what input source it is in)
＊The picture here shows an example of the INFO screen
in a DTV source.
ViewSonic Corporation
16
Confidential - Do Not Copy
N3735w-2M
Advertisement
Table of Contents
