ViewSonic N3735w-2M Service Manual page 12

Rear View of the Product
Item
1 Power (AC input)
HDMI 1 Input Terminal
2
3 HDMI 2 Input Terminal
4 VGA signal input
5 YPbPr 2 signal input
YPbPr 1 signal input
6
7 Composite Video input
8 S-Video input
9 Air/Cable input jack
ViewSonic Corporation
Description
Plug-in the supplied AC Power cord and connect to the AC
input power source.
Connect this port to the HDMI output of A/V device.
Connect this port to the HDMI output of A/V device.
Connect a 15-pin D-sub RGB cable to the RGB output of your
computer and the other end to the RGB input on the rear of the
LCD TV.
Connect this port to the YPbPr output of A/V device.
Connect this port to the YPbPr output of A/V device.
Connect this jack to the composite video output connectors on
your A/V equipment.
Connect the S-Video cable from the compatible device to this
connector on the rear panel of the LCD TV.
Connect the coaxial (RF) connector from Antenna/ Cable/
Digital cable.
9
Confidential - Do Not Copy
N3735w-2M