ViewSonic N3735w-2M Service Manual page 18

Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front of the
panel.
Initial Setup
When the TV is initially powered on, basic settings
proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The Initial Setup wizard window will be displayed.
Press ENTER to start the wizard.
2. Press ▲ or ▼ to select your language, then press ► to
continue next step. To return to the previous page,
press ◄.
3. Select your tuner mode from Air or Cable, then press ►
to continue.
Connect cable and/or antenna, and select Scan or Skip
Scan with ▲ or ▼, then press ► to continue. If you
select Skip Scan at this step, you can still perform
channel scan in Menu.
4. The channel scanning now starts. To interrupt scanning,
press MENU at any time.
5. After you complete the Initial Setup, press ENTER to
exit the wizard.
ViewSonic Corporation
15
Confidential - Do Not Copy
N3735w-2M