Antenna Installation Instructions ... 4 Cleaning the LCD TV ... 4 Getting Started Package Contents ... 5 Fixing ViewSonic LCD TV to the Wall ... 5 Front View of the Product ... 6 Rear View of the Product ... 7 Remote Control ... 8 Installation ...
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic N3752w...
Purchase Date: Product disposal at end of product life ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal.
LCD TV screen or ® case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
3. Through the matching screw holes in the bracket, there are 6 screws mounted on the backside of the LCD TV. Loosen all 6 screws, and keep for future use. Use only approved wall-mounting brackets advised by ViewSonic or your local distributor. Notes: •...
1. Press VOL+ and MENU buttons at the same time to lock power button, and press VOL+ and MENU buttons again to unlock it. 2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press VOL- and VOL+ buttons again to unlock it. ViewSonic N3752w...
Connect this port to the RCA audio output connectors of your A/V device. Audio output Connect this port to your A/V device with audio in (RCA) connectors or to audio amplifier. PC Audio input Connect this port to PC line out jack. Headphone Jack Connect this port to your headphone. ViewSonic N3752w...
Page 11
UP/ DOWN for OSD function select and LEFT/ RIGHT for function adjust ENTER: Enter the function setting On Screen Display (OSD) menu ON/OFF Change channel for TV only Play/ Stop/ Pause/ Record/ Forward/ Rewind II button = freeze picture Display current information N3752w...
Page 12
000. • Replace batteries if remote control keys are not functioning properly, this is a normal behavior that indicates batteries are low. ViewSonic Default Setting ViewSonic Samsung Sony ViewSonic ViewSonic WMA-100 Sony Device Buttons N3752w...
3. Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter pre-programmed code. LED will blink to indicate pre-programmed code was captured correctly. Pre-Programmed Code Notes Record the three digit codes for your device here: ViewSonic Device Buttons N3752w...
2027. If user wants to control a Philips STB with a 006 code under the AUX key, a 3 must be added in the beginning of the pre-programmed code making it 3006. AUX Button N3752w...
TV system. This air input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV system (ATSC) can be found by the scanning of “AIR” in the AUTO SCAN function. (See page 31.) RF Cable or Adapter (not supplied) ViewSonic N3752w...
Page 22
Connect Video/ Audio cables from compatible devices into the back panel of LCD TV. 1) With AV cable: 2) With S-Video cable: ViewSonic RCA A/V Cable VCR or DVD Player S-Video Cable (not supplied) Audio Cable (not supplied) VCR or DVD Player N3752w...
(stereo system sold separately). ViewSonic YPbPr Cable (not supplied) Audio Cable (not supplied) VCR or DVD Player (DVD Player should have the HDMI output terminal) VCR or DVD Player HDMI Cable (not supplied) Audio Cable (not supplied) Stereo system N3752w...
LCD TV. VGA 15 Pin Cable 7. PC Audio In Connect the Audio cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV. PC Audio Connection (not supplied) ViewSonic Headphone (not supplied) N3752w...
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. AC wall socket ViewSonic Audio Cable (not supplied) A/V Device Stereo System N3752w...
Press DISPLAY, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, Smart Sound Modes, and Smart Picture Modes, depending on what input source it is in.) ViewSonic N3752w...
Page 27
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – OFF, 30min, 60min, 90min, or 120min. ViewSonic N3752w...
Page 28
• Use ▲▼ to select the control you want to adjust. • When selecting the control with Press <ENTER>, press ENTER to enable the function. • Press ◄► to adjust or select the settings. • Press MENU to exit from the OSD menu. ViewSonic N3752w...
• Digital Audio Language: To select the audio language of the digital TV. Note: To adjust the above controls in the Audio settings, Smart Sound Mode must be set to “User”. * • Smart Sound Mode: To select sound mode between User, Rock, POP, Live, Dance, Techno, Classic, and Soft. ViewSonic N3752w...
Channel Lock: To lock channels. Use ◄► to select the channel you want to lock, and then press ENTER to lock or unlock it. Change Password: To change the password, press ENTER and enter the password again. Press ENTER, and the following screen appears. ViewSonic N3752w...
Page 31
The movie Ratings in the US are defined as following. General audience Parental guidance suggested PG-13 Parents strongly cautioned Use ENTER button to block or unblock the ratings, and use MENU to exit. ViewSonic Restricted NC-17 No one 17 and under limited Adult audience only N3752w...
Page 32
• OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds) • Memory Recall: To restore the factory default settings. ViewSonic TV-PG Parental guidance suggested TV-14 Parents strongly cautioned: this program contains some material that is unsuitable for children under 14 years of age TV-MA Mature audience only N3752w...
TV channels. (C1~C4, Service1~Service 6, or OFF) • Digital CC Style: Press ◄► to select Caption Style from As Broadcaster or Custom. When Custom is selected, use ▲▼ to select the desired controls, ◄► to adjust detailed settings. ViewSonic N3752w...
• Fine Tune: To adjust the delay time of data and clock to reduce noise in picture. • Manual Clock: To adjust the horizontal pixel clock of the video. • H. Position: To adjust the horizontal position of the picture. • V. Position: To adjust the vertical position of the picture. ViewSonic N3752w...
To 40,000 feet (12,000m) 942mm (W) x 726mm (H) x 295mm (D) 37.1’’ (W) x 28.6’’ (H) x 11.6’’ (D) 25.4 kg (55.9 Ib) UL, FCC-B (Doc-B), NOM, BEST-7 < 200 W (green LED) < 3 W (red LED) N3752w...
• CATV is connected improperly or not connected; please check all the CATV connections. • The cable TV service is interrupted; please contact your cable operator. Picture is cut off/with sidebar screen • Is the image positioned correctly? • Are screen mode adjustments such as picture size set correctly? ViewSonic N3752w...
For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ Web Site Region United States www.viewsonic.com/support/ Canada www.viewsonic.com/support/ ViewSonic T=Telephone Email F=Fax T= (800) 688 6688 service.us@viewsonic.com F= (909) 468 1202 T= (866) 463 4775 service.ca@viewsonic.com N3752w...
How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Need help?
Do you have a question about the N3752w and is the answer not in the manual?
Questions and answers