ViewSonic N3735w-2M Service Manual page 10

7. Mechanical
The following table defines the mechanical specifications of this product for both chassis and
cabinet.
Parameter
Dimension
Net Weight
Chassis Plastic Material
External Plastic Chassis
Components
Internal Plastic Cabinet
Components
Exterior Chassis Color
Chassis Component's Color
Difference
Chassis Color Drift Due to
UV-Light
Chassis Texture
Molded Plastic
Screen Printed Parts, Bird
Logo Recess
Rear Label
Wall- Mount
Sample
In addition, all exterior surfaces shall have uniform texture/color. The maximum acceptable
gap between the buckets to bezel plastic pieces shall be within 1.5 mm. The maximum
acceptable gap between LCD panel and bezel shall be within 3.0 mm.
8. Environmental
Operating Temperature
Humidity
Altitude
Storage Temperature
Humidity
Altitude
ViewSonic Corporation
W=941mm, H=726mm and D=295mm
28KG
ABS (CABS HB / ABS VO / PC+ABS)
Plastic Chassis, Cover, Stand, Lens and Button
N/A
PZ 2-608-80
N/A (Only black c color on chassis)
The color drift due to UL-Light shall be less than 10 "Delta E" in the
1976 CIE L*a*b color space. Testing shall be performed according
to the requirements of ASTM Test Method D4459-93.
Front Bezel:N/A ; Back Cover:MT-11020
Workmanship shall be inspected according to ViewSonic Molded
Plastic Parts Specification, VSCMPPSPEC001V1.2.
Artwork shall be provided and confirmed by ViewSonic.
A label identifying the product name, model/serial number and FCC
ID/Logo shall be placed into the rear label recess located on the rear
panel of the chassis.
400mmx200mm VESA high hole (n=6), M4 x 10mm , pitch
=0.75mm screw mounting kit not included.
Sample of textured color chips, plastic material specification, and
Material Safety Data Sheets shall be submitted to ViewSonic prior to
Mass Production Release.
0°C to +40°C
0 ~ 65% non-condensing
0 meter to +2000 meters above sea level
-20°C to +60°C
0 ~ 90% non-condensing
0 meter to 12,000 meters above sea level
7
Specification
Confidential - Do Not Copy
N3735w-2M