ViewSonic N4285p-4M Service Manual page 28

Using USB Function
1. When input source is selected to USB, insert the USB
device into the USB jack.
2. Use ◄ or ► to select the folder you want, and press
ENTER. Press MENU to switch between the function
keys and the Thumbnail icon.
3. To select "LastLayer" go back to the previous page.
4. When in display mode, press MENU to display the
function key list.
※You can also use the buttons on the TV panel to make
selection. The panel buttons function the same as the
following keys on the remote control:
VOL - : ►
VOL + : ◄
MENU : MENU/EXIT
CH - : ▼
CH + : ▲
INPUT : ENTER
In USB mode, the OSD function keys are as follows:
＊ Thumbnail: To display in thumbnail.
＊ Slide Show: Press this key to auto-play the pictures.
Intervals can be adjusted from 1~30 seconds.
＊ Next: Press this key to display the next picture.
＊ Previous: Press this key to display the previous picture.
＊ Zoom: Press this key to zoom in.
＊ Pan: When in Zoom mode, select Pan and press
▲▼◄► to move.
＊ Rotate: Select Rotate and press Enter to rotate
the picture.
＊ Last Layer: Press this key to return to the
previous page.
Notes:Initial password:0000
If you forget your initial password,you can press"3660"to resume.
ViewSonic Corporation
25
Confidential - Do Not Copy
N4285p-4M