Table of Contents
Advertisement
b. The supporting arm in the front of lifting arm may be turned or pushed or pulled inward
or outward, or to left and right.
c． The height of pallet can be adjusted by turning it clockwise or anticlockwise.
6.5 Control unit
Release handle
7 Maintenance and Troubleshooting
7.1 Maintenance
7.1.1 For daily maintenance and service of the lift, see operation steps, use and cautions
described in the previous page.
7.1.2 The working environment and the surface of this machine should be cleaned
usually.
7.1.3 During the use of this machine, if any oil leaking is found, check the leakage source.
Check whether the screw of the hydraulic oil hose is tighten, if it is loosen, it should
10
Advertisement
Table of Contents
Troubleshooting
