Table of Contents
Advertisement
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROG +/– on the remote of this
player. If the TV screen changes to a different programme each time you
press PROG +/–, the TV tuning is correct.
To obtain a clear blue screen
If the blue screen does not appear
clearly in step 4 above, turn the RF
CHANNEL screw at the rear of this
player with a screwdriver to a
position where the TV clearly
displays the blue screen.
Selecting the TV system
For your TV to receive the correct
signal from this player, you must set
the TV SYSTEM switch at the rear of
this player to either G (for system B/
G) or K (for system D/K). If this
switch is set to the wrong position,
the sound will be distorted.
Selecting the NTSC PB switch
For your TV to receive the correct
signal from this player, you must set
the NTSC PB switch at the rear of this
player. If this switch is set to the
wrong position, the picture will be
distorted.
To play an NTSC-recorded tape
Set NTSC PB at the rear of this player according to the colour system of your
TV.
If your TV is
PAL
NTSC 4.43
NTSC 3.58
Notes
• If you play a VCD whose colour system is different from the NTSC PB position
(VCD) you selected, the size of the picture may not be correct.
• After you changed the NTSC PB position (VCD) of this switch, turn off the power
once, then turn it on again.
RF CHANNEL
G
K
TV SYSTEM
NTSC PB
ON PAL TV NTSC 4.43 NTSC3.58
PAL
Set NTSC PB (VHS/VCD) to
PAL /PAL
4.43 NTSC/PAL
NTSC/NTSC
NTSC3.58
9
Getting Started
Advertisement
Table of Contents
