Specifications; Supplied Accessories - Sony SLV-7000KCH Operating Instructions Manual

Specifications

System
RF output signal
UHF channels 30 to 39
Aerial out
75-ohm asymmetrical aerial socket
VCD part
Laser
Semiconductor laser
Wavelength
780 - 790 nm
Signal format system
NTSC, PAL
Frequency response
2 Hz to 20 kHz ±0.5 dB
Signal-to-noise ratio
More than 105 dB
Harmonic distortion
Less than 0.0022%
Inputs and outputs
LINE-1/2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE 1/2 OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Video CD DIRECT OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO OUT, phono jack (2)
Standard output: 2.0 Vrms max
Load impedance: 47 kilohms
Output impedance: less than 600 ohms
64
Additional Information
General
Power requirements
110 – 240 V AC, 50/60 Hz
Power consumption
30 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 x 119 x 384 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 7.0 kg

Supplied accessories

Remote commander (1)
R6 (Size AA) batteries (2)
Aerial cable (1)
Mains lead (1)
Audio/video cable (3-phono to 3-phono) (1)
Microphone (1)
Plug adaptor (SLV-7000K CH only) (1)
Design and specifications are subject to change
without notice.