Sony SLV-7000KCH Operating Instructions Manual page 32

Operation
(when recording on the VHS
part of this player)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT 2 to light up the
button (or press INPUT SELECT on
the remote until "LINE 2" appears).
• Press TAPE SPEED to select the tape speed (SP or LP for the PAL
system, and SP or EP for the NTSC system).
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VHS part of
this player. Search for the point to start recording and press P PAUSE.
3
Press r REC on this VHS part of this player and set it to recording
pause.
4
To start editing, press the P PAUSE buttons on the VCR and this VHS
part at the same time.
To stop editing
Press the p STOP buttons on the VCR and this VHS part.
Tips
• To edit more precisely, press the P PAUSE buttons on the VCR and this VHS part to
release pause.
• To cut out unwanted scenes while editing, press P PAUSE on this VHS part when
an unwanted scene begins. When it ends, press P PAUSE again to resume
recording (Assemble Editing).
Note
• If you start recording following the procedure above, the VHS part of this player
won't start recording with the APC function. To record a tape with the APC
function, press r REC again during recording pause in step 3 so that this player
analyses the tape. Then when you start recording in step 4, press P PAUSE after the
APC indicator stops flashing. If you press P PAUSE before the APC indicator stops
flashing, the APC function is cancelled.
Enjoying Playback and Recording a Tape
P PAUSE
r REC
continued
31