Table of Contents
Advertisement
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON under SET UP VHS in the menu system (page 35).
Use this feature to listen to dubbed audio over the original hi-fi audio.
When AUDIO MIX is set to ON, the AUDIO MONITOR button does not
function. Remember to reset AUDIO MIX to OFF after playing the tape.
Audio dubbing from the microphone
Using the microphone, you can add songs or narration on a recorded tape
during playback of the tape. Sound from the microphone is recorded on the
normal audio track together with the left sound and right sound of the
original hi-fi sound.
Before you start...
• Connect the microphone(s) to the MIC IN 1 and/or 2 jack(s), and its
control plug to the CONTROL jack. And then the SELECTOR on the
microphone to KEY or S.D.
KARAOKE (ON/OFF)
CONTROL
Microphone
1
Set KARAOKE (ON/OFF) to ON.
2
Insert the prerecorded tape into the VHS part of this player. Search for
the end of the section to be replaced and press P PAUSE.
Make sure that the tape has its safety tab in place.
3
Press COUNTER RESET to reset the counter to "0H00M00S."
4
Search for the beginning of the section to be replaced and press P
PAUSE.
5
Press AUDIO DUB.
The audio dubbing indicator
6
To start editing, press P PAUSE to start dubbing and sing or speak into
the microphone.
When the counter reaches "0H00M00S," audio dubbing stops
automatically.
P PAUSE
MIC IN 1/2
appears in the display window.
Enjoying Playback and Recording a Tape
AUDIO DUB
COUNTER
RESET
P PAUSE
continued
37
Advertisement
Table of Contents
