Changing The Command Mode - Sony BDP-CX7000ES Operating Instructions Manual

Changing the Command
Mode
When you have more than one Sony Blu-ray
Disc/DVD player, the supplied remote may
interfere with another player. In this case,
change the command mode for this player
and the supplied remote to one that differs
from the other player.
The default command mode for this player
and the supplied remote is BD1.
THEATRE
OPEN/CLOSE
Number
buttons
DIGITAL
REPEAT
HOME
SCENE SEARCH
To switch the command mode for the
player
1
Press HOME to display the home menu.
2
(Setup) using B/b.
Select
3
Select "System Settings" using V/v, and
press .
4
Select "Command Mode," and press
5
Select a command mode (BD1, BD2, or
BD3), and press
The display asks for confirmation.
6
Select "Yes," and press
The command mode for the player is
changed to the one you set in step 5.
62
AV
OPERATION CHANGE OPERATION CHANGE
BD
AMP TV BD BD
1 1 2 2 3 3
1 1 2 2 3 3
4 4 5 5 6 6
4 4 5 5 6 6
7 7 8 8 9 9
7 7 8 8 9 9
0 0
ENTER
0 0
CLEAR ENTER ENTER
ANALOG
TIME
SHUFFLE ALL DISCS DISPLAY
POP UP/
MENU
B/V/v/b/
SORT GROUP
.
.
To switch the command mode for the
remote
Set the command mode for the remote so it
matches the command mode you set in step 6
above (for the player).
1
Press POP UP/MENU while pressing
down BD.
2
While BD is flashing, enter the 3-digit
code number using the number buttons,
then press ENTER.
Command mode Code number
BD1
BD2
BD3
z
If the command mode for the player does not match
the remote, the command mode for the player
appears on the front panel display when you try to
operate the remote.
.
310
311
312