Table of Contents
Advertisement
device is not impervious to water damage in any
situation. It is important that all compartments are
closed tightly.
Follow these tips carefully to prevent damage to the
device.
•
Whenever your device gets wet, dry it thoroughly with a
clean, soft cloth.
•
Do not expose the device to salt water or ionized water, or to
water over 5.0 feet deep for more than 30 minutes. If your
device is exposed to fresh water, dry it thoroughly with a
clean, soft cloth. If the device is exposed to any liquid other
than fresh water, rinse the device with fresh water
immediately and dry it thoroughly with a clean, soft cloth.
Failure to rinse the device in fresh water and dry it as
instructed may cause the device to suffer from operability or
cosmetic issues.
•
Do not expose the device to water at high pressure, such as
ocean waves or a waterfall.
•
If the device is dropped or receives an impact, the water and
dust resistant features of the device may be damaged.
Internal Use Only
•
The touchscreen and other features may not work properly if
the device is used in water or in other liquids. [013016]
Specific Absorption Rate (SAR)
Certification Information
Your wireless device is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for Radio Frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government.
These FCC RF exposure limits are derived from the
recommendations of two expert organizations: the
National Council on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
DRAFT
Health and Safety Information
3
Advertisement
Table of Contents
