Advertisement
1.
If necessary, identify the location of additional holes for the
faucet or other accessories and drill a 1/4" pilot hole from
the back side of the sink.
IMPORTANT NOTICE
To prevent damage to the unit, do not use an auger style drill
bit.
VI-003
WARNING
B B r r e e a a t t h h i i n n g g H H a a z z a a r r d d
When cutting or drilling the Swanstone
product, use a dust collection method
which prevents dust particles from going into the air.
Always work in a well-ventilated area. To keep the area well
ventilated, open windows and use exhaust fans. Always
use an OSHA approved dust mask when cutting, drilling, or
sanding Swanstone products.
800-325-7008
2.
Drill fixture hole(s), using the 1/4" pilot hole for a guide,
with a 1-3/8" hole saw.
VI-008
VI-002
3.
Faucet may be installed at this time per manufacturer's
instructions.
VI-009
Vanity Top Installation — Cabinet Mount
1.
Install cabinet per manufacturer's instructions.
Note: Make sure cabinet is level before installing vanity top.
7
Installation Procedure
VI-005
The Swan Corporation – Swanstone
Advertisement
