Download Print this page

Swann Chesapeake Vanity Manual page 13

Cabinet mount vanity tops & bowls

Advertisement

WARNING
sealants and denatured alcohol. Alcohol vapors are both
flammable and hazardous to breathe. Silicone vapors may
irritate eyes and nose. Personal injury can result from
improperly handling or use of products, such as denatured
alcohol.
Always
follow
recommendations for the safe use of these products.
Ventilate any work area before beginning to apply silicone
sealants, cleaning agents, or solvents.
7.
Apply a bead of silicone around top of bowl flange. Align
and place the bowl onto the countertop.
VI-035
8.
Attach the sink with clips and screws. Loosely tighten the
screws.
VI-037
800-325-7008
S S o o l l v v e e n n t t s s H H a a z z a a r r d d
Follow
all
manufacturers'
safety instructions for silicone
the
manufacturer's
9.
If mounting the bowl with an undermount overlap, bowl
should be positioned, as shown.
3" Wide Plywood Strip
3/4"
VI-039
10. If mounting the bowl with an undermount reveal, bowl
should be positioned, as shown.
3" Wide Plywood Strip
3/4"
VI-038
11 . Verify bowl is in correct position and has not shifted, then
completely tighten screws. Do not overtighten.
12. Use a soft cloth with mineral spirits to remove any excess
silicone.
13. Check for a consistent seal of silicone around inside
perimeter of bowl and countertop. Add silicone if
necessary.
14. Connect the faucet supply lines per the manufacturer's
instructions.
VI-011
13
Installation Procedure
Approx.
1/4"
Approx.
1/4"
The Swan Corporation – Swanstone

Advertisement

loading