Airplane Mode; Usb Connection; Sd Memory Card - Panasonic FZ-N1 Series Operating Instructions Manual

Sharing the unit's Internet connection via Bluetooth (Bluetooth tethering)
Use this procedure to use the Bluetooth connection and share the Internet connection with a Bluetooth
device that supports PAN profiles. You may not be able to share the unit's mobile network connection
(models supporting cellular transmission only) depending on your mobile network service provider.
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ® [Hotspot
& tethering].
2.
Tap the [Bluetooth tethering] switch to turn it on.

Airplane mode

When using the unit where wireless connections are prohibited, such as on airplanes and in hospitals, you
can turn off all wireless connections by enabling airplane mode. Once you have turned on airplane mode,
you can manually turn certain wireless communication features on again, such as Wi-Fi and Bluetooth.
Turning airplane mode on and off
Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] (®
1.
[Advanced]) .
*1
*1
Android 9 only
2.
Tap the [Airplane mode] switch to turn it on or off.
Note
•
You can also turn airplane mode on and off by using the [Dashboard] app (see page 39).

USB connection

You can use the unit's micro USB port to connect the unit to a computer or other device.
Connecting the unit to a computer
You can connect the unit to a computer and transfer files. Connect the unit to a computer using the USB
connection cable and follow the procedure below.
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Connected devices] ®
[USB].
2.
Tap [Transfer files].
Note
•
You can also change the setting by tapping the notification in the notifications panel.
•
Do not remove the USB connection cable while the unit is being accessed. Doing so may corrupt
the data.
Sharing the unit's Internet connection via USB (USB tethering) (models supporting cellular
transmission only)
Use this procedure to use the unit's USB connection to share the unit's Internet connection with a computer.
You may not be able to share the unit's mobile network connection (models supporting cellular transmission
only) depending on your mobile network service provider.
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [Network & Internet] ® [Hotspot
& tethering].
2.
Tap the [USB tethering] switch to turn it on.

SD memory card

See "Installing an SD card" (page 16) for the card installation procedure.
See "Encrypting the SD card" (page 35) for information about encrypting the contents of the SD card.
Operating Instructions - Reference Manual
Connectivity
33