Gainsborough H591 Manual

35cm Mercury Glass Gazing Ball Plinth
H591
v001: 10/02/21
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
USE:
1. Press On/Off button to operate.
2. Press On/Off button to turn light on, then place into direct sunlight for 12 hours to charge battery.
3. The light will automatically turn off in bright light and turn on in dim light.
REPLACE BATTERIES:
1. Remove screw from battery compartment lid
2. Remove battery compartment lid.
3. Remove expired batteries and discard properly
4. Clean the battery contacts and also those of the device prior to battery installation.
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
(H) 35cm x(W) 12cm x (D) 12cm
Composition
80% Glass, 5% Iron, 15% PET
•
MADE OF MERCURY GLASS THAT NOT ONLY
SPARKES LIGHT OFF IT LUMINOUSLY IN THE DAY
TIME BUT AT NIGHT IT GIVES A MESMERISING
ARRAY OF LIGHT AND COLOUR.
•
THE GLASS IS TONAL BETWEEN ORANGE, GOLD
AND RED
•
POSITION ANYWHERE IN YOUR GARDEN WHERE
YOU WOULD LIKE TO ADD SOME COLOUR,
REFLECTION AND LIGHT.
•
SOLAR POWERED WITH SEPARATE SOLAR PANEL
SO YOU CAN POSITION IT IN DIRECT SUNLIGHT
FOR BEST RESULTS
•
AUTOMATICALLY ILLUMINATES AT NIGHT
Battery
1 x AA NiMH 1.2V dc rechargeable