Gainsborough H738 Assembly Instructions/Instructions For Use

Set 3 Firework Path Lights
H738
v001: 29/03/21
Please read and retain these instructions for future reference

Technical specifications:

Powered by batteries – 3× AA 1.5 V DC
(batteries not included)
Enclosure rating – IP44
Cable length: 50cm
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.

Three-position switch functions:

TIMER – the product lights up in repeated cycles daily for 6 hours,
then turns off for 18 hours
ON – constantly on
OFF – constantly off
To easily insert stakes into the ground, it is recommended to wet
the ground first. To avoid damaging garden stakes when inserting
into the ground, select a spot in soft, rock-free soil. Insert the base
of the stake first then gently insert the rest of the stake into the
base. DO NOT push directly against the solar cell or the ornament
housing containing the actual LED light.

WARNING!

• The light sources are not replaceable.
• Do not connect the chain to power supply while it is still in packaging.
Dimensions
(H) 34cm
•
SET OF 3 'FIREWORK' PATH LIGHTS THAT
GIVE THE EFFECT OF A FIREWORK DISPLAY
BUT ARE ACTUALLY BATTERY OPERATED
LIGHTS
•
SITTING 34CM TALL (EXCLUDING THE
VERY BOTTOM GROUND STAKE) STAKE
THEM AMONG YOUR FLOWER BEDS,
ALONG A PATH, IN FLOWER POTS ETC TO
CREATE A STUNNING EFFECT
•
EACH STAKE HAS 40 LEDS (not
replaceable)
•
WITH IP44 RATED BATTERY BOX WITH
TIMER FUNCTION (6 HRS ON AND 18 HRS
OFF), POWERED BY 3XAA BATTERIES (NOT
INCLUDED)
•
50CM BETWEEN EACH LIGHT
•
AVAILABLE IN WHITE AND MULTI-
COLOURED