Gainsborough H319 Instructions For Use

Pk4 Hanging Colour Changing Solar Lights
H319
v001: 11/12//20
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Please leave in Switched OFF mode during initial charging for
first 24 hours.
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
Each light is 7 x7 x10cm
•
HANGING SOLAR COLOUR CHANGING DIAMOND
SHAPED SOLAR LIGHTS
•
WITH COLOUR CHANGING LEDS INSIDE AND SOLAR
POWERED (LEDs not replaceable)
•
HANG FROM TREE BRANCHES, TRELLIS' ETC FOR A
SCATTERING OF JEWELLED LIKE COLOUR
Battery: 1x NIMH AAA rechargeable battery (included)
The product uses rechargeable
battery that is included
The ON/OFF switch is located at
the bottom of the light next to the
battery compartment
Turn ON switch to on the light
Turn OFF switch to off the light
The solar light has a light sensor so
when the lamp is switched on the
light will start automatically and
light up all dark areas located near
the lamp.
For first time use, it will take a full
day of sunlight to fully charge the
battery