Gainsborough H249 Instructions For Use

68cm Solar Flowering Tree Stakes
H249
v001: 07/12/20
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
BEFORE FIRST USE: Remove the protective film from the solar panel.
CHARGING AND OPERATION:
Set switch (located on the back of solar case) to
direct sunlight for at least 8 hours.
The light will work automatically. It will charge under direct sunlight during the day time and illuminate at
night.
NOTE: In order to test the lights simply cover the solar panel with your hand and
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
68CM TALL (INC GROUND STAKE)
•
PRETTY FLOWERING TREE STAKES WITH 20
FLOWERS ON EACH (LEDs not replaceable)
•
SOLAR POWERED WITH MULTICOLOURED LED'S
THAT ILLUMINATE IN EACH OF THE FLOWERS AT
NIGHT TIME
•
AUTOMATICALLY TURNS ON AT DUSK
•
SCATTER THEM AROUND FLOWER BEDS,
PATHWAYS OR ANYWHERE WHERE YOU WANT
A TOUCH OF COLOURFUL SPARKLE IN YOUR
GARDEN
Battery: 1x AA 1.2v 600Mah, Ni-MH
"ON" position. Charge the solar product by placing it under
the light should turn on