Whirlpool WEE745H0FS User Manual page 7

Keypad Feature
RAPID PREHEAT Rapid oven
preheating
AQUALIFT SELF Clean cycle
CLEAN
START (hold Oven control
3 sec to lock) lockout
SETTINGS/ Energy save
CLOCK
Instructions
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to OFF, but it
can be changed to ON.
1. Press RAPID PREHEAT.
2. The current setting will be displayed.
3. Press the "1" keypad to adjust the setting.
4. Press START or CANCEL to exit and display the time of day.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be
removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat.
If preheating for the Bake cycle has already started, Rapid Preheat may be started directly by
pressing RAPID PREHEAT.
See the "Clean Cycle" section.
1. Check that the oven is OFF.
2. Press and hold START (hold 3 sec to lock) for 3 seconds.
3. A tone will sound and "Control Locked" will scroll, and then "Locked" will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked. The cooktop functions
are not affected by the oven control lockout.
Press and hold SETTINGS/CLOCK for 3 seconds to change status. The display will scroll
"Energy saver on." or "Energy saver off."
If Energy Save is ON, the range will go into sleep mode after 5 minutes of inactivity. Any keypad
press will activate the display. If Energy Save is OFF, the display will be on at all times.
7