Changing The Iso Speed - Canon PowerShot S50 User Manual

Changing the ISO Speed

Raise the ISO speed when shooting in dark places or when you want to shoot with
a faster shutter speed. You can choose from the following speeds: Auto, 50, 100,
200 and 400.
1
Press the
2
Select * (ISO Speed) using C or D on
the multicontroller.
* The current setting is displayed.
3
Select the desired setting using B or A
on the multicontroller.
You can shoot the image right after selecting
settings by pressing the shutter button. This
screen will appear again, once the image is shot.
4
Press the
5
Shoot the image.
• Higher ISO speeds increase the image noise. To take clean images, use as low an
ISO speed as possible.
• Although the AUTO setting selects the optimal speed, it will automatically raise
the speed when the shooting conditions limits are reached. It will also raise the
speed when the light from the flash is insufficient to illuminate the subject matter.
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 180)
/ / button.
/ / button.
85