Preparing The Camera; Charging The Battery Pack - Canon PowerShot S50 User Manual

Preparing the Camera

Charging the Battery Pack

Recharge Battery Pack NB-2L (supplied) with Battery Charger CB-2LT or CB-2LTE before you use the
camera for the first time and subsequently when the "Charge the battery pack" message is displayed.
1
2
CB-2LT
Charge Indicator
CB-2LTE
Charge Indicator
To protect and prolong the life of the battery pack, do not charge it for 24 hours or
longer at a time.
• This is a lithium ion battery pack so there is no need to completely use or
discharge it before recharging. It can be recharged at any time.
• It takes approximately 80 minutes to bring a fully discharged battery pack to full
charge (based on Canon's testing standard). Charging it within a temperature
range of 5 to 40º C (41 to 104º F) is recommended.
• Charging times will vary according to the surrounding humidity and battery pack
charge state.
• You may hear a noise during charging. This is not a malfunction.
Align the edge of the battery pack with
the line on the battery charger, then slide
the battery in the direction of the arrow.
Battery charger model names and types
vary by region.
(For CB-2LT)
Plug the battery charger into a power
outlet.
(For CB-2LTE)
Attach the power cord to the battery
charger and plug it into a power outlet.
(For CB-2LT and CB-2LTE)
• The charge indicator will light red while the
battery pack is charging. It will change to a
steady green when the charge is complete.
• After charging, unplug the battery charger and
remove the battery pack from it.
15