Using The Flash - Canon PowerShot S50 User Manual

Using the Flash

Use the flash according to the guidelines below.
Red-eye reduction, Auto
Auto
Red-eye reduction, Flash on
Flash on
Flash off
1
Press the
flash modes.
• The selected flash mode appears on the LCD
monitor.
• You can switch between settings by pressing the
button.
When the red-eye reduction function is on
When the red-eye reduction function is off
2
Shoot the image.
• The flash will fire if the indicator beside the viewfinder lights orange when
the shutter button is pressed halfway. (In
• Shooting procedures are the same as for the
Setting the Red-eye Reduction Function
The red-eye reduction lamp fires when the flash is used in dark areas. This prevents
light from reflecting back from the eyes and making them appear red.
54
The flash fires automatically as required by the lighting level, and the
red-eye reduction lamp fires each time the main flash fires
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp and the flash always fire.
The flash always fires.
The flash does not fire.
button to switch between
, the flash does not fire.)
mode (p. 45).