Automated Playback (Slide Show) (continued)
Adjusting the Play Time and Repeat Settings
You can change the play time for all the images in a show and have the show
repeat itself continuously.
Sets the duration that each image in a slide show is displayed. The options are any
Play Time
one of 3-10 seconds, 15 seconds, 30 seconds and Manual.
Sets whether the slide show stops when all the slides have been displayed or
Repeat
continues to display until stopped.
1
Display the slide show menu.
2
Select [Set up] using B or A on the
multicontroller and press
3
Select [Play Time] or [Repeat] using C or
D on the multicontroller.
4
Select a setting using B or A on the multicontroller.
Play Time
Select a play time.
Repeat
Select [On] or [Off].
116
.