Automatic Tuning; Preset Tuning - Sony STR-DE495 Operating Instructions Manual

Hide thumbs Also See for STR-DE495:
Table of Contents

Advertisement

Direct tuning (continued)
4
If you've tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
5
Repeat steps 1 to 4 to receive another
station.
Tips
• If you do not remember the precise frequency, press
TUNING + or TUNING – after entering the value
close to the frequency you want. The receiver
automatically tunes in the station you want. If the
frequency seems to be higher than the entered value,
press TUNING +, and if the frequency seems to be
lower than the entered value, press TUNING –.
• If "STEREO" flashes in the display and the FM
stereo reception is poor, press FM MODE to change
to monaural (MONO). You will not be able to enjoy
the stereo effect, but the sound will be less distorted.
To return to stereo mode, press FM MODE again.
The tuning scale differs depending on the area code
as shown in the following table. For details on area
codes, see page 4.
Area code
U, CA
CEL, CEK, SP, CN
TW, KR, AU
E2/E3
AR, MX
* The AM tuning scale can be changed (page 45).
GB
30
FM
AM
100 kHz
10 kHz*
50 kHz
9 kHz
50 kHz
9 kHz*
50 kHz
10 kHz

Automatic tuning

If you don't know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1
Press TUNER FM/AM repeatedly to
select the FM or AM band.
The last received station is tuned in.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end of
the band
Scanning is repeated in the same direction.
3
To continue scanning, press TUNING +
or TUNING – again.

Preset tuning

After you have tuned in stations using Direct
Tuning or Automatic Tuning, you can preset
them to the receiver. Then you can tune in any
of the stations directly by entering its 2-
character preset code using the supplied
remote. Up to 30 FM or AM stations can be
preset. The receiver will also scan all the
stations that you have preset.
Before tuning to preset stations, be sure to
preset them by performing steps on "Presetting
radio stations" (page 31).

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Str-de595

Table of Contents