Understanding The Multi Channel Surround Displays - Sony STR-DE495 Operating Instructions Manual

Hide thumbs Also See for STR-DE495:
Table of Contents

Advertisement

Understanding the multi channel surround displays

1
2 3
SP
L
C
SW
L F E
SL
S
qf
1 SW: Lights up when sub woofer selection is
set to "YES" (page 17) and the audio signal is
output from the SUB WOOFER jacks.
2 SP*: (STR-DE495 only) Lights up when you
turn on the receiver.
3 SP A*: (STR-DE595 only) Lights up when
you select to drive Speaker System A.
4 SP B*: (STR-DE595 only) Lights up when
you select to drive Speaker System B.
* Does not light up when you connect
headphones to the PHONES jack.
5 ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby
Digital format.
6 ; PRO LOGIC II: "; PRO LOGIC"
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
Pro Logic II processing ("PLII MOV" or
"PLII MUS") is applied (page 24). However,
both indicators do not light up if the center
and surround speakers are set to "NO", and
"A.F.D. AUTO" or "DOLBY PL" is selected.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding does not function for DTS format
signals.
GB
26
4
5
a
SP A
SP B
DIGITAL
OPT
COAX
R
qs
qa
SR
qd
6
7
a
DTS
PRO LOGIC II
D.RANGE
0
7 DTS: Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is NOT set to "ANALOG"
(page 21).
8 Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 29–33 for tuner operations.
Note
"RDS" only appears for models of area code
CEL, CEK only.
9 SLEEP: Lights up when sleep timer is
activated.
0 D.RANGE: Lights up when dynamic range
compression is activated. See page 27 to
adjust the dynamic range compression.
qa COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
qs OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
MEMORY
STEREO
MONO RDS
8
SLEEP
9

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Str-de595

Table of Contents