Table of Contents
Advertisement
Dakota Digital
ELECTRIC CRUISE CONTROL UNIVERSAL APPLICATION, INSTALLATION, & OWNER'S MANUAL
CONTENTS:
PARTS LIST....................................................... 4
PARTS DIAGRAM.............................................. 4
SAFETY PROCEDURES ...................................5
HELPFUL HINTS................................................ 5/6
SWITCH SETTINGS........................................... 6
INSTALLATION ..................................................7
TROUBLESHOOTING.........................................16
WARRANTY.........................................................19
OPERATING INSTRUCTIONS ............................20
The Dakota Digital Cruise Control System Includes:
Qty.
Description
1- A 250-2316 CRUISE MODULE
1- B 250-2317 CRUISE HARNESS
1- C 250-3607 CRUISE CABLE
1- D 250-2236 MODULE BRACKET
1- E 250-3700 CABLE BRACKET 1
1- F 250-3425 CONVOLUTED TUBING (58") 1
1- 250-2214 HARDWARE PACKAGE (UNIVERSAL)
1- 250-2232 HARDWARE PACKAGE (-G, GM KIT)
2- G1 MODULE BOLT 2
2- G2 SELF-THREADING BOLT (M6 X 19) 4
1- G3 BEAD CHAIN 1
2- G4 BEAD CHAIN CONNECTOR
2- G5 CONNECTOR COVER
1- G6 LOOP CABLE (67MM)
1- G7 THREE BEAD CONNECTOR
Your vehicle must have a VSS (Vehicle Speed Signal) wire or an available signal generator for installation of the Cruise Control.
The CRS-2000 includes the appropriate signal generator in the kit.
Qty.
Description
1- G8 EYELET CONNECTOR
1- G9 TIE STRAP (102MM)
10- G10 TIE STRAP (190MM)
1- G11 TUBE CLAMP (10MM)
1- G12 FLAG NUT (THREADED TUBE CLAMP)
2- G13 M5 NUT
1- G14 GM HATCLIP
2- G15 LOCKWASHER NUT (#10-32)
1- G16 COTTER PIN (2MM X 16MM)
1- G17 SNAP-IN ADAPTOR
1- G18 PUTTY SEALING
1- G19 ADAPTOR THROTTLE CLIP W/CABLE
2- G20 CONN, SELF-STRIP (16-22 AWG)
2- G21 CONN, SELF-STRIP (16-18 AWG)
2- G22 SCREW, ROUND HEAD (#10-32 X .5)
CRS-2000 also includes a signal generator
- 4 -
650014B
Advertisement
Table of Contents
