Table of Contents
Advertisement
When finished, a message appears on the
display to indicate that the rinsing cycle of
the water circuit has finished.
13. Touch the CONFIRM
from the function.
14. Shake the tube in order to remove any
remaining water.
15. Place the tube back into its seat and
remove the jug.
16. Close the door.
Cleaning and maintenance
button to exit
4.5 Extraordinary maintenance
Removing and installing the door seal
(not on pyrolytic models)
To remove the seal:
• Release the clips located in the 4 corners
and pull the seal outwards.
To refit the seal:
• Hook the clips in the 4 corners onto the
seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
185
Advertisement
Table of Contents
