Before You Start; Finding A Viewing Video Source Input On Your Tv; Initial Setup - FUNAI NB500FX5 Owner's Manual

5.

BEFORE YOU START

5.1. Finding a Viewing Video Source Input on Your TV

After you have completed all of the connections to your TV, review the steps below.
1. Press [ (POWER-ON)] to Turn On the unit.
2. Turn On your TV.
3. Please locate the Source / Input / AUX / Video button on TV's remote control. The button may vary on the TV brand and
model. Once you have located the button, press until you see "Please Wait..." or "Welcome!" on the Screen.
This is the correct viewing of the video Source Input.
• If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
• If a certain amount of time has passed since you Turned On the unit, welcome screen only appears the first time you
Turn On the unit.

5.2. Initial Setup

Please follow the instructions below to complete the initial setup.
1. While welcome screen is displayed, use [
2. Language setup screen will appear. Use [
Please select your language for on-screen
display.
English
Español
Français
Return
Please Wait...
] to select "Next", then press [OK].
] to select your language, then press [OK].
Language
continued on next page
EN - 13